PIC18F2620-I/SP - 8 Bit MCU, Flash 40 MHz, 64 KB Dip28

PIC18F2620-I/SP - 8 Bit MCU, Flash, PIC18 Family PIC18F26xx Series Microcontrollers, PIC18, 40 MHz, 64 KB, 28 Pins


The PIC18F2620-I/SP is an Enhanced Flash Microcontroller with 10-bit A/D and nanoWatt technology. The PIC18F2620 family introduces design enhancements that make these microcontrollers a logical choice for many high-performance and power sensitive applications. The PIC18F2620 family incorporates a range of features that can significantly reduce power consumption during operation. The PIC18F2620 device include an internal oscillator block which generates two different clock signals, either can be used as the microcontroller's clock source. This may eliminate the need for external oscillator circuits on the OSC1 and/or OSC2 pins. The PIC18F2620 microcontroller can be serially programmed while in the end application circuit. This is simply done with two lines for clock and data and three other lines for power, ground and the programming voltage.

CPU - Up to 10 MIPS performance and C compiler optimized RISC architecture
System - Watchdog timer with separate RC oscillator
nanoWatt power managed modes - run, idle and sleep modes
Analogue - 10 channels, 100kSPS and programmable brown-out reset module
100 years typical flash/data EEPROM retention
Self-programmable under software control
Priority levels for interrupts
8 x 8 single-cycle hardware multiplier
In-Circuit Debug (ICD) via two pins