SS411A - SENSOR, HALL EFFECT, BIPOLAR, TO92, SINK

Em Stock
SENSOR, HALL EFFECT, BIPOLAR, TO92, SINK
Sensor, Terminales: Taladro Pasante
Tensión de Salida Mín.: 400mV
Tensión de Alimentación DC Mín.: 3.8V
Tensión de Alimentación DC Máx.: 30V
Configuración de Salida: Receptor
Sensor, Alojamiento: Rectangular
Velocidad de Conmutación: 1.5µs
Sustancia Extremadamente Preocupante (SVHC): No SVHC (16-Dec-2013)
Corriente de Salida: 20mA
Núm. de Contactos: 3

SS495B - Sensores magnéticos / Efeito de hall de suporte

Em Stock
SS495B - Sensores magnéticos / Efeito de hall de suporte de quadro

Tipo: Ratiometric
Tensão de alimentação operacional: 5 V, 9 V
Corrente de suprimento: 8.7 mA
Corrente de saída máxima: 10 mA
Temperatura operacional máxima: + 150 C
Estilo de montagem: Through Hole
Caixa / Gabinete: TO-92-Flat-3
Temperatura operacional mínima: - 40 C
Quantidade do pacote de fábrica: 500
Tensão de alimentação - Máx: 10.5 V
Tensão de alimentação - Mín: 4.5 V

Hall Sensor Velocity Measurement and Counting Sensor 3144E

Em Stock
Hall Sensor Velocity Measurement and Counting Sensor 3144E

Hall sensor module is used for magnetic field detection, which adopts 3144E Hall Switch Sensor.
Module Interface Description

VCC: connect to positive 3.3-5V
GND: connect to negative
DO: Digital signal output on module, outputs low level when magnetism available
AO: Hall real-time voltage output

There are two outputs on the module

AO, Hall real-time output
DO, the Hall signal output after being regulated by the comparator

Module features

Small size: 32mm X 14mm
With a 3mm mounting screw hole
You can use 3-5.5v DC power supply
With Hall real-time output signal
More stable output signal after being regulated by comparator
Comparator output capability: 16m ...

TLE4906LHALA1 - Sensor Ef Hall, Unipolar, 20mA, SIP 3pinos

Em Stock
TLE4906LHALA1 - Sensor Ef Hall, Unipolar, 20mA, SIP 3pinos, 2.7 V, 18 V.

Descrição geral do produto
The TLE4906L is a high precision Hall Effect Switch with highly accurate switching thresholds for operating temperatures up to 150°C. It features high sensitivity and high stability of the magnetic switching points and high resistance to mechanical stress by active error compensation.
Operation from unregulated power supply
Reverse battery protection
Superior temperature stability
Peak temperatures up to 195°C without damage
1µs Typical low jitter
Digital output signal
ESD sensitive device, take proper precaution while handling the device.

LTS15-NP - Transdutor de Corrente, 15A

Disponível em armazem remoto 1-3 Dias
LTS15-NP - Transdutor de Corrente, 15A

Informação do produto

Sensor Output: Closed Loop
Supply Voltage DC Min: 4.75V
Supply Voltage DC Max: 5.25V
Current Measuring Range DC: -48A to 48A
Current Measuring Range AC: -48A to 48A
Response Time: 400ns
Accuracy %: 0.2%
Product Range: LTS 15-NP Series