AD7997BRUZ-0 - Analogue to Digital Converter, Octal, 10 bit

AD7997BRUZ-0 - Analogue to Digital Converter, Octal, 10 bit, 188 kSPS, Single Ended, I2C, Single, 2.7 V

Descrição geral do produto

The AD7997BRUZ-0 is a 8-channel 10-bit Analogue to Digital Converter (ADC) with I²C compatible interface that operates from a single 2.7 to 5.5V power supply and features a 2µs conversion time. The parts contain a 8-channel multiplexer and track-and-hold amplifier that can handle input frequencies up to 11MHz. It provides a 2-wire serial interface that is compatible I²C interface. Each part comes in two versions and each version allows for at least two different I²C addresses. Both versions support standard and fast I²C interface modes. ADC normally remains in a shutdown state while not converting and power up only for conversions. The conversion process can be controlled by using the CONVST pin, by a command mode where conversions occur across I²C write operations or an automatic conversion interval mode selected through software control. On-chip limit registers can be programmed with high and low limits for the conversion result.

10-bit ADC with 2µs typical fast conversion time
8 Single-ended analogue input channels
Low power consumption
Sequencer operation
Automatic cycle interval mode
Out-of-range indicator/alert function
Pin-selectable addressing via AS

Aplicações

Signal Processing

Informação do produto

Resolution (Bits): 10bit
Sampling Rate: 188kSPS
Input Channel Type: Single Ended
Data Interface: I2C
Supply Voltage Type: Single
Supply Voltage Min: 2.7V
Supply Voltage Max: 5.5V
ADC / DAC Case Style: TSSOP
No. of Pins: 20Pins
Operating Temperature Min: -40°C
Operating Temperature Max: 85°C
Product Range: Octal 10-Bit SAR ADCs
Automotive Qualification Standard: -
MSL: MSL 1 - Unlimited