MCP130T-270I/TT - Fixed LDO Voltage Regulator, 1V to 5.5V, 2.7V Threshold, 350ms Delay, Active-Low, SOT-23-3
Descrição geral do produto
The MCP130T-270I/TT is a Supervisor Circuit with active-low open-drain output. The voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage drops below a safe operating level. It will assert the RESET signal whenever the voltage on the VDD pin is below the trip-point voltage.
Holds microcontroller in reset until supply voltage reaches stable operating level
Resets microcontroller during power loss
RESET to VCC=1V
Accuracy of ±125mV for 5V systems and ±75mV for 3V systems over-temperature
45µA Typical operating current
5kR Internal pull-up resistor
Aplicações
Automotive
Informação do produto
Threshold Voltage: 2.7V
No. of Supervisors / Monitors: 1Monitors
Supply Voltage Min: 1V
Supply Voltage Max: 5.5V
Reset Type: Active-Low
Digital IC Case: SOT-23
No. of Pins: 3Pins
Delay Time: 350ms
Operating Temperature Min: -40°C
Operating Temperature Max: 85°C
Product Range: -
Automotive Qualification Standard: AEC-Q100
MSL: MSL 1 - Unlimited