DRV8302DCA - Motor Pre Driver HTSSOP56

DRV8302DCA . - Motor Pre-Driver, 8V to 60V supply, 2.3A/1 Output, HTSSOP-56

Descrição geral do produto
The DRV8302DCA is a 3-phase Gate Driver with dual current shunt amplifiers and buck regulator. It provides three half bridge drivers, each capable of driving two N-channel MOSFETs. The device supports up to 1.7A source and 2.3A peak current capability. It can operate off of a single power supply with a wide range from 8 to 60V. It uses a bootstrap gate driver architecture with trickle charge circuitry to support 100% duty cycle. It uses automatic hand shaking when the high-side or low-side MOSFET is switching to prevent current shoot through. Integrated VDS sensing of the high and low-side MOSFETs is used to protect the external power stage against overcurrent conditions. The DRV8302 also includes an integrated switching mode buck converter with adjustable output and switching frequency.
Bootstrap gate driver with 100% duty cycle support
Dual integrated current shunt amplifiers with adjustable gain and offset
Hardware control interface
Programmable dead time control (DTC) protection
Programmable overcurrent protection (OCP)
PVDD and GVDD under-voltage lockout (UVLO) protection
GVDD over-voltage lockout (OVLO) protection
Over-temperature warning/shutdown (OTW/OTS) protection
Reported through nFAULT and nOCTW pins
6 or 3 PWM input modes
3.3 and 5V Interface support
Green product and no Sb/Br

Informação do produto
Motor Type:
Three Phase DC Brushless
No. of Outputs:
1Outputs
Output Current:
2.3A
Output Voltage:
-
Driver Case Style:
HTSSOP
No. of Pins:
56Pins
Supply Voltage Min:
8V
Supply Voltage Max:
60V
Operating Temperature Min:
-40°C
Operating Temperature Max:
125°C