FT231XS-R - USB Interface, USB-UART Converter, USB 2.0, 2.97

FT231XS-R - USB Interface, USB-UART Converter, USB 2.0, 2.97V Descrição geral do produto The FT231XS is an USB2.0 Full Speed IC, offers a compact bridge to full handshake UART interfaces. The device is an UART, capable of operating up to 3Mbaud, with low power consumption (8mA). The FT231XS includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over a UART interface. Single Chip USB to Asynchronous Serial Data Transfer Interface Entire USB Protocol Handled on Chip, No USB Specific Firmware Programming Required Fully Integrated 2048-byte EEPROM for Storing Device Descriptors and CBUS I/O Configuration Fully Integrated Clock Generation with no external crystal required + Optional clock o/p selection ...
3,32 €
Com IVA
Sem Stock
Disponível a partir de: 2019-07-30
Referência:
FT231XS-R
Favorito0
Adicionar à lista de desejos
Produtos relacionados
Sem items
Descrição

FT231XS-R - USB Interface, USB-UART Converter, USB 2.0, 2.97V

Descrição geral do produto

The FT231XS is an USB2.0 Full Speed IC, offers a compact bridge to full handshake UART interfaces. The device is an UART, capable of operating up to 3Mbaud, with low power consumption (8mA). The FT231XS includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over a UART interface.

Single Chip USB to Asynchronous Serial Data Transfer Interface
Entire USB Protocol Handled on Chip, No USB Specific Firmware Programming Required
Fully Integrated 2048-byte EEPROM for Storing Device Descriptors and CBUS I/O Configuration
Fully Integrated Clock Generation with no external crystal required + Optional clock o/p selection
Data Transfer Rates from 300 baud to 3Mbaud
512-byte Transmit and Receive Buffer utilising buffer smoothing technology for high data throughput
Royalty-free VCP and Direct (D2XX) drivers eliminate requirement for USB driver development
Configurable CBUS I/O Pins
Transmit and Receive LED Drive Signals
UART Interface Support for 7 or 8 Data Bits, 1 or 2 Stop Bits and Odd/Even/Mark/Space/No Parity

Synchronous and Asynchronous Bit Bang Interface Options with RD# and WR# Strobes
Battery Charger Detection, presence of a charger on USB port to enable faster charging of Batteries
Device Supplied Pre-programmed with Unique USB Serial Number
Supports Bus Powered, Self-powered and High-power Bus Powered USB Configurations
Integrated +3.3V Level Converter for USB I/O
True 3.3V CMOS drive output and TTL input (Operates down to 1V8 with external pull up)
Configurable I/O Pin Output Drive Strength
Integrated Power-on-reset Circuit
UART Signal Inversion Option
Internal 3.3/1.8V LDO Regulators

Aplicações

Signal Processing, Computers & Computer Peripherals, Communications & Networking, Consumer Electronics, Sensing & Instrumentation, Industrial, Power Management

Informação do produto

USB IC Type: USB-UART Converter
USB Standard: USB 2.0
Supply Voltage Min: 2.97V
Supply Voltage Max: 5.5V
Interface Case Style: SSOP
No. of Pins: 20Pins
Data Rate: 3Mbaud
No. of Ports: 4 Port
Operating Temperature Min: -40°C
Operating Temperature Max: 85°C
Product Range: FT231X
MSL: MSL 3 - 168 hours

Dados do produto
FT231XS-R
Opiniões
Sem comentários
16 outros produtos na mesma categoria:
Clientes que compraram este produto também compraram:

Código QR

Opções

Clique para mais produtos.
Não foram encontrados produtos.

Crie uma conta gratuita para gravar produtos favoritos.

Iniciar Sessão

Criar uma conta gratuita para criar listas de desejos.

Iniciar Sessão