HC-SR04 - Ultrasound Sensor

Marca:
Ultrasound Sensor HC-SR04 Description: The HC-SR04 is a small low-cost ultrasonic sensor that can measure distance from 2cm up to 4 meters with a stable performance and high ranging accuracy under a 15° detection angle and in an easy-to-use package. This sensor is very easy to interface with the Arduino board or any other microcontroller. As any ultrasound sensor, the HC-SR04 operates like a simple radar, by sending a series of pulse waves and listen to an echo. To measure a distance, start by sending a short trigger pulse to the TRIG pin, at the same time monitor the ECHO pin until the output is HIGH and measure the pulse width. The distance is equal to (pulse duration in seconds) * (speed of sound) / 2 where the pulse width is in unit of second and sound speed is in unit of ...
3,08 €
Com IVA
Em Stock
Disponível a partir de: 2014-11-25
Referência:
HC-SR04
Favorito0
Adicionar à lista de desejos
Produtos relacionados
Sem items
Descrição

Ultrasound Sensor HC-SR04

Description: The HC-SR04 is a small low-cost ultrasonic sensor that can measure distance from 2cm up to 4 meters with a stable performance and high ranging accuracy under a 15° detection angle and in an easy-to-use package. This sensor is very easy to interface with the Arduino board or any other microcontroller.

As any ultrasound sensor, the HC-SR04 operates like a simple radar, by sending a series of pulse waves and listen to an echo. To measure a distance, start by sending a short trigger pulse to the TRIG pin, at the same time monitor the ECHO pin until the output is HIGH and measure the pulse width.

The distance is equal to (pulse duration in seconds) * (speed of sound) / 2 where the pulse width is in unit of second and sound speed is in unit of meter/second. Normally sound speed is 340m/s under room temperature.

To use this sensor with the Arduino simply download the srf04-library if you're using the Arduino IDE 1.0 or the Ultrasound Library if your IDE version is older. We recommend a pause of 60-100ms between each distance reading to allow the echo pulse enough time to settle.

Note: The HC-SR04 is not temperature compensated, because the speed of sound varies with the room temperature you might get different result for the same distance when measuring at different room temperatures. If you need more precision we recommend the Maxbotix Ultrasound Sensors.

Features:

Operating Voltage: 5V DC
Operating Current: 15mA
Operating Frequency: 40KHz
Maximum reading distance: 400cm
Minimum reading distance: 2cm
Detection Angle: 15°
Resolution: 0.5cm
Trigger pulse: >10us TTL pulse
Output pulse with proportional to distance
Maximum pulse width: 38ms if no obstacle
Dimension: 45 x 20 x 15 mm

Dados do produto
HC-SR04
Opiniões
Sem comentários
16 outros produtos na mesma categoria:
Clientes que compraram este produto também compraram:

Código QR

Opções

Clique para mais produtos.
Não foram encontrados produtos.

Crie uma conta gratuita para gravar produtos favoritos.

Iniciar Sessão

Criar uma conta gratuita para criar listas de desejos.

Iniciar Sessão