DF1B-2428PCF - Contact, DF1B Series, Pin, Crimp, 24 AWG
Descrição geral do produto
The DF1B series 2.5mm Connector for discrete wire connection. This series connector is a new type to insert the ID contacts in the case. Using this method, the following merits can be gained. By using the ID contact and crimping contact together, different current capacity cables can be mixed in one case. After connection, the contact can be replaced in excellent maintainability. Because the insulation displacement area is protected by the case, high reliability can be assured. Since the insulation displacement process can be performed only by replacing the applicator of the existing crimping machine, no expensive machine for insulation displacement is required. The high profile header is also available, corresponding to the board potting process (sealed with resin) as water-proof measures. The single row and double row contacts are aligned for board-to-cable and in-line series respectively, while standard tin and gold plating products are available.
Potting header
Straight and right-angle connector orientation
250VAC Voltage rating
30, 50 and 100 Mating/unmating cycles
Crimping and IDC Wire termination method
Aplicações
Industrial
Informação do produto
Product Range: DF1B Series
Contact Gender: Pin
Contact Termination Type: Crimp
Wire Size AWG Max: 24AWG
Contact Plating: Tin Plated Contacts
For Use With: Hirose DF1B Series 2.5mm Pitch Plug Connectors
Wire Size AWG Min: 28AWG
Contact Material: Phosphor Copper