TOE7610 - 4-quadrant amplifiers DC to 100 kHz 150 W

TOE7610 - 4-quadrant amplifiers DC to 100 kHz 150 W

Special features–150 W source and sink power
Brief load current 3 x Irated
Analog control input 0 to 5 V or 0 to 10 V
½ 19 width, 3 HU parallel installation possible
Slew (rise) rate approx. 6 V/µs to 25 V/µs (depends on model)
Sensing
Output at front, optional at rear
Optimally suitable for electrical noise testing of components against vehicle electrics ripple

General
Power supplies for laboratory use are mostly only power sources. They are only able to deliver power with one single polarity, i.e. these instruments only work in one quadrant of the output voltage/current diagram. Common amplifiers de-liver voltages with both priorities, but are generally unable to absorb power values in a range comparable to that which they are able to deliver. They therefore main-ly work as two-quadrant devices. The TOE 7610 series of four-quadrant amp-lifiers is able to work as a power sink as well as a power source with equal values of delivered or absorbed power.The TOE 7610 series is thus a voltage amplifier, bipolar voltage and current source, and current sink in one instru-ment. Having to combine different instru-ments, where problems frequently occur with the coordination of individual com-ponents and the tendency to oscillate, now belongs to the past.