FLUKE 884X-RTD - Sonda de Temperatura 100 Ohm RTD

FLUKE 884X-RTD - Sonda de Temperatura 100 Ohm RTD

Manufactured using a coil suspension element design for increased shock and vibration resistance
Mineral-insulated sheath with a minimum bend radius of 19 mm (3/4 in) for flexibility and durability
Specifications:
Resistance Nominal 100 Ohm
Temperature coefficient 0.00385 O/O ºC nominal
Temperature range -200 C to 300 ºC (transition and cable temperature: 0 ºC to 25% ºC)
Drift rate + 0.13 ºC at 0 ºC after 1000 hours at 300 ºC
Sheath Material 316 stainless steel
Leads PTFE-insulated, nickel-plated stranded copper, 22 AWG
Termination 4-wire banana
Time constant Four seconds maximum for 63.2% response to step change in water moving at 3 fps
Bending radius 19 mm (3/4 in) except for 50 mm (2 in) area of sheath near tip
Calibration Includes manufacturer’s NIST-traceable calibration and table with R vs. T values in 1 ºC increments from -196 ºC to 300 ºC. Callendar-van Dusen coefficients included
Immersion At least 100 mm (4 in) recommended
Accuracy (includes calibration uncertainty and short-term stability) ±0.50 ºC at -196 ºC
±0.050 ºC at 0 ºC
±0.052 ºC at 200 ºC
±0.055 ºC at 300 ºC
Size 9 in L x 3/16 in diameter
Marking Each RTD is marked with the Fluke name and part number