JDS6600 - Gerador de Funções 2 Canais 15 Mhz
O gerador de sinais DDS série JDS6600 pode gerar onda senoidal, onda quadrada, onda triangular, onda de pulso e onda arbitrária e assim por diante.
A frequência será de até 15MHz. E tem correcção do ciclo de funcionamento, função de modulação de amplitude e função de varrimento de frequência, etc. Pode apresentar sinal de saída, amplitude e frequência ao mesmo tempo. Esta série tem características de frequência de amplitude, e o seu aspecto é muito delicado e belo. Pode ser aplicado em fábricas, escolas, institutos de investigação e laboratórios.
Sine frequency range - 0~15MHz
Square frequency range - 0~15MHz
Triangle frequency range - 0~15MHz
Pulse frequency range - 0~6MHz
CMOS/TTL digital frequency range - 0~6MHz
Arbitrary wave frequency range - 0~6MHz
Square rise time - ‰¤30nS
Mininum Frequency resolution - 0.01µHz(0.00000001Hz)
Frequency accuracy - ±20ppm
Frequency stability ±1ppm/3h
Waveform Characteristics:
Waveform - Sine, Square, Triangle, Pulse (duty-cycle correction),Partia Sine, CMOS, DC level, Half-wave, Full-Wave, Pos-Ladder, Neg-Ladder, Noise, Exponential Rise, Exponential Fall, Tone, Sinc Pulse, Lorentz Pulse, and 60 kinds user defined waveform)
Waveform length - 2048 points
Waveform sampling rate - 200MSa/s
Waveform vertical resolution - 12 bits
Sine:
Harmonic suppression - ‰¥45dBc(<1MHz); ‰¥40dBc(1MHz~20MHz)
Total harmonic distortion - <0.8%(20Hz~20kHz,0dBm)
Square and Pulse:
Overshoot (Square) - ‰¤5%
Duty-cycle range(Pulse) - 0.1%~99.9%
Ramp wave:
Linearity - ‰¥98%(0.01Hz~10kHz)
Output Characteristics:
Amplitude range - ‰¤10MHz:2mVpp~20Vpp/ ‰¤15MHZ:2mVpp~10Vpp
Amplitude resolution - 1mV
Amplitude stability - ±0.5%/5 h
Amplitude flatness - ±5%(<10MHz); ±10%(>10MHz)
Waveform Output:
Output impedance - 50O±10%(typical)
Protection - All the signal output termianl can be shorted within 60s
DC Offset:
Offset adjusting range - Output Amplitude >2V/ 0.2V/ 0/ -9.99V~9.99V/ -2.5V~2.5V/ -0.25V~0.25V
Offset resolution - 0.01 V
Phase characteristics:
Phase adjusting range - 0~359.9°
Phase resolution - 0.1°
TTL/COMS Output:
Low level - <0.3V
High level - 1V~10V
Level rise/fall time - ‰¤20ns
External Measurement Function:
Frequency meter function:
Frequency measurement range - 1Hz~100MHz
Measurement accuracy - Gate time continuously adjusted between0.01s~10s
Counter function:
Counting region - 0-4294967295
Coupled mode - 2kinds Coupling modes, DC and AC
Control mode - Manual operation
Input signal voltage range - 2Vpp~20Vpp
Pulse width measurement - 0.01us (resolution), 20s (MAX measuring time)
Period measurement - 0.01us (resolution), 20s (MAX measuring time)
Sweep Function:
Sweep channel - CH1 or CH2
Sweep type - linear sweep, log sweep
Sweep time - 0.1s~999.9s
Setting range - User settings
Sweep direction - Forward, Backward and Roundtrip
Burst function:
Number of pulses - 1-1048575
Burst mode - Manual Trig, CH2 Trig, Ext.Tring(AC), Ext.Tring(DC)
Technical parameters
Display:
Display type - 2.4 inch TFT color LCD
Storage and loading:
Quantity - 100 groups
Location - 00 to 99(Power on will load the position 00)
Arbitrary wave:
quantity - 1 to 60, totally 60 groups(default set 15 groups)
Interface:
Interface mode - USB to serial interface
Extension interface - There is serial interface of TTL level mode to be convenient for user development.
Communication speed - 115200bps
communication protocol - Open protocol
Power supply:
Voltage range - DC5V±0.5V
Manufacturing process - Surface-mount technology, FPGA design, high reliability, long service life
Buzzer - User can set ON or OFF by procedure
Operating characteristics - Full button operation, knob continuous adjustment
Environmental conditions - Temperature: 0~40 oCHumidity:<80%