Boiao 0.5Lt de Fluxo

General Description ELFLUX 2001 NC is a solvent-based no-clean flux for use in wave soldering. ELFLUX 2001 NC has a reduced solid content suitable for lead-free soldering is classified as ORL0. ELFLUX 2001 NC is halide free and contains a small amount of rosin which makes residues much safer than with other resin free fluxes. Thinner 201 is used as solvent to control the density of ELFLUX 2001 NC ELFLUX 2001 NC provides for a improved wetting and leaves extremely few, non-tacky residues on the printed circuit board. The residues are non-conductive and non-corrosive. Electrical in-circuit testing is possible without any problem. Since the solder joints show only very few residues, cleaning is in general not required. ELFLUX 2001 NC contains a corrosion inhibitor so that ...
15,99 €
Com IVA
Disponível em armazem remoto 1-3 Dias
Referência:
ELFLUX2001NC0.5L
Favorito2
Adicionar à lista de desejos
Produtos relacionados
Sem items
Descrição

General Description
ELFLUX 2001 NC is a solvent-based no-clean flux for use in wave soldering. ELFLUX 2001 NC has a
reduced solid content suitable for lead-free soldering is classified as ORL0. ELFLUX 2001 NC is halide
free and contains a small amount of rosin which makes residues much safer than with other resin free
fluxes.
Thinner 201 is used as solvent to control the density of ELFLUX 2001 NC
ELFLUX 2001 NC provides for a improved wetting and leaves extremely few, non-tacky residues on
the printed circuit board. The residues are non-conductive and non-corrosive. Electrical in-circuit
testing is possible without any problem. Since the solder joints show only very few residues, cleaning
is in general not required. ELFLUX 2001 NC contains a corrosion inhibitor so that no corrosion occurs
on copper surfaces under the influence of humidity.
ELFLUX 2001 NC improves the soldering result due to the optimised flux chemistry. The risk of solder
bridges and shorts is extremely reduced.

Areas of use
ELFLUX 2001 NC has been developed especially for the processing of lead-free solders in wave
soldering processes. It is equally suitable for all standard printed board surface finishes. The flux can
be used for telecom and automotive electronic applications.

Classification
ELFLUX 2001 NC is classified as ORL0 per DIN EN 61190-1-1 and per IPC ANSI/J-STD-004.

Technical Specification ELFLUX 2001 NC
Appearance: Clear, nearly transparent liquid
Smell: Mild, alcoholic
Density: [g/cm³] (20 °C) 0.797 ± 0.003
Solid content [%] (Per IPC-TM-650 2.3.34): 2.6
VOC content: [%] > 95, solvent based 100, solvent
Acid number [mgKOH/g flux]: 18 -1/+2
Halides [%]: None
pH-value (20°C): 4
Flash point {°C]: 12
Ignition temperature [%]: 399
Recomended Thinner: Thinner 201

Thinner 201
Appearance:Clear, transparent, liquid
Smell:Mild, alcoholic
Density [g/cm³] (20 °C):0.787 ± 0.003
Solid content [%] (Per IPC-TM-650 2.3.34):None
VOC content [%]:100, solvent
Acid number [mgKOH/g flux]:None
Halides [%]:None
pH-value (20°C):Neutral
Flash point {°C]:12
Ignition temperature [%]:399

Dados do produto
ELFLUX2001NC0.5L
Opiniões
Sem comentários
16 outros produtos na mesma categoria:
Clientes que compraram este produto também compraram:

Código QR

Opções

Clique para mais produtos.
Não foram encontrados produtos.

Crie uma conta gratuita para gravar produtos favoritos.

Iniciar Sessão

Criar uma conta gratuita para criar listas de desejos.

Iniciar Sessão