X9C102PZ - IC, Digital Pot 1K, 9C102, DIP8

X9C102PZ - IC, Digital Pot 1K, 9C102, DIP8

Descrição geral do produto

The X9C102PZ is a Digitally Controlled Potentiometer. The device consists of a resistor array, wiper switches, a control section and non-volatile memory. The wiper position is controlled by a three-wire interface. It is implemented by a resistor array composed of 99 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS, U/D and INC inputs. The position of the wiper can be stored in non-volatile memory and then be recalled upon a subsequent power-up operation. This device can be used as a 3-terminal potentiometer or as a 2-terminal variable resistor in a wide variety of applications ranging from control to signal processing to parameter adjustment.

Solid-state
3-wire serial interface
100 Wiper tap points
99 Resistive elements
Low power CMOS
High reliability

Aplicações

Consumer Electronics, Industrial, Medical

Informação do produto

End To End Resistance: 1kohm
No. of Pots: Single
Control Interface: 3 Wire, Serial
Track Taper: Linear
Resistance Tolerance: ± 20%
Supply Voltage Min: 4.5V
Supply Voltage Max: 5.5V
Potentiometer IC Case Style: DIP
No. of Pins: 8Pins
No. of Steps: 100
Temperature Coefficient: ± 300ppm/°C
Operating Temperature Min: 0°C
Operating Temperature Max: 70°C
Product Range: Single 100-Tap Non-Volatile Digital Pots
Automotive Qualification Standard: -
MSL: -