S3B-PH-SM4-TB - Ficha, PCB, JST, 2mm, 3 Pinos
The PH series side entry, surface mount shrouded header from JST are 2.0mm pitch, single row wire to board disconnect crimp style connectors. These are thin, low profile, highly reliable connectors with 8.0mm mounting height and 4.5mm width. Fully shrouded header has walls on all four sides to prevent improper connection to the mating housing and to prevent the instruction of flux and other contaminants. Its housing is made up of heat resistant resin so that it is not adversely affected during reflow soldering. Because of its compact size and surface mount termination, this connector meets the demand for high-density mounting of components inside electronic products.
Current rating of 2A
Voltage rating of 100VAC/DC
Temperature range from -25°C to 85°C
Wire size of 32AWG to 24AWG
Number of contacts varies from 2 to 16 pins
Contact material is brass
Tin plated contact
UL, CSA and TUV certified
Informação do produto
Connector Systems: Wire-to-Board
Pitch Spacing: 2mm
No. of Rows: 1Rows
No. of Contacts: 3Contacts
Contact Termination Type: Surface Mount Right Angle
Product Range: PH Series
Connector Shroud: Shrouded
Contact Material: Brass
Contact Plating: Tin Plated Contacts